Filter
Top Products
PROGRAMMING TH E REMOTE TO CONTROL
AN AUXI LIARY COMPONENT
Your remote can be programmed to operate RCA, ProScan,
and Dimensia brand auxiliary equipment, such as a radio, CD
player, tape player, turntable, amplifier, digital satellite
receiver, or DVD player.
1. Turn on the component to be programmed.
2. Look up your component's code number on the code list.
3. Press and hold the AUX button.
4. Enter the code from the code list.
5. Release the AUX button and press PWR or CHAN up or
down to see if the audio component responds to the
remote commands.
OPERATI NG TH E AUXI LIARY COMPONENT
After you have programmed your remote, see which buttons
will operate your component.
1. Point the remote at the component and press AUX. If it
does not turn on, press AUX and then PWR.
2. You may want to experiment to see which buttons will
operate your component. Try pressing buttons, such as
PLAY, REV, and FWD.
Audio/Video Codes
RCAdProScanlDimensia
AM/FM .......................................... 03
Auxiliary Component ................ 04
CD ................................................. 07
DVD .............................................. 10
Phono ...................................... . .... 05
Digital Satellite Receiver ........... 08
Tape I ........................................... 06
Tape 2 ........................................... 09
This remote may not operate all
models of the brands that are shown.
38