Filter
Top Products
52
TV WITH RF JACK ONLY
This connection assumes:
• You are connecting antenna, cable, or cable box system.
• Your television has only an RF input jack.
This connection provides:
• Mono sound playback from VCR.
• Record one channel while watching another (except
when using a cable box for all channels).
To use this connection, you must have:
• (1) coaxial cable for cable or antenna connection; (2) for
cable box
If your cable box is remote controllable:
• Position it on top of the VCR as shown. Make sure not to
block any of the VCR's ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to channel 3 or 4, whichever one you selected
with the 3CH4 switch on the back of the VCR.
Auto TV/VCR Setting:
• Set the Auto TVNCR feature to ON.
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
2. Press the TVoVCR button, and select a different channel
on the TV.
i
VCR
TV
VCR
vol's '. ' _
SIGNALS "_
WALL " I_
TRANSMITTERS
Position Remote-Controllable
Cable Box
CABLE, CABLE B0X, O%TENNA
_[_R OUT fN I OM
tin
NTENNA