Filter
Top Products
45
OTHER FEATURES
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel
INDEX SEARCH
Searching for
index marks...
Press STOP to cancel
3. If you want to search through a certain number of index marks,
press two number buttons to enter the number of marks you
want to search. Press CLEAR on the r emote to correct an entry.
4. Pr ess FOR WARD (FWD) to sear ch forward or REVERSE (REV) to
search in reverse. The VCR will locate your index mark and begin
playback. If you did not enter a specific index number, the VCR
will locate the next index mark and begin playback.
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR:
• A mark too close to your location on the tape.
• The mark at the beginning of a recorded segment of five
minutes or less.
• The first index mark on the tape when you start at the beginning
of the tape.
Go-To Search
The Go-T o search feature enables the VCR to quickl y locate a
counter reading anywhere on the tape. When the VCR locates
the counter reading, it will begin playback.
1. Pr ess ST OP.
2. Press SEARCH on the remote until the GO-TO SEARCH menu
appears on the screen.
3. Press number buttons to enter the hour(s) and/or minutes of
the counter reading you want the VCR to “go to”. Press
CLEAR on the r emote to correct an entry.
4. Pr ess FOR WARD (FWD) to sear ch forward or REVERSE (REV)
to search in reverse.
5. Press ST OP to stop Go-T o searching.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REV or FWD
to go to -:--:00
Press SEARCH to exit
GO-TO SEARCH
Searching for
0:00:00...
Press STOP to cancel
Time Counter
The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It helps
locate the beginning or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR.