Filter
Top Products
55
connections
TV with RF jack and satellite receiver
This connection assumes:
• You have a basic satellite system.
• Your TV does not have audio/video input jacks.
This connection provides:
• Mono sound playback from VCR.
• Recording from a satellite receiver.
• Recording one off-air or cable channel while watching another.
To use this connection, you must have:
• (4) coaxial cables and (3) audio/video cables
To connect:
1. Connect cables as shown.
2. Return to the First Things First Section, then follow the steps.
Using This Connection
• Tune your TV to channel 3 or 4, whichever one you selected
with the 3CH4 switch on the back of the VCR.
• To record and watch off-air or cable, tune your VCR to
channel 3 or 4 whichever one you selected with the CH3/CH4
switch on the back of the receiver. Turn off receiver.
• To watch and/or record from the satellite receiver, tune your
VCR to its line input (LINE appears in display).
Auto TV/VCR Setting:
• Set the Auto TV/VCR feature to ON.
To play a tape:
1. Insert a tape.
2. If necessary, press VCR and then PLAY.
To record one off-air or cable program and watch another:
1. Turn off the satellite receiver and begin recording a program
using a recording feature.
2. Press TV•VCR and select a different channel on the TV.
To record a satellite receiver program:
1. Turn on the satellite receiver, tune the VCR to its line input,
and begin recording a program using a recording feature.
SATELLITE RECEIVER
TV
SATELLITE SIGNALCABLE,CABLE BOX OR ANTENNA
IN FROM ANT
OUT TO TV
CH3
CH4
SATELLITE
IN
S-VIDEO
L
R
AUDIO
VIDEO
CABLE/
ANTENNA
VCR
CH
AUDIO
R
L
VIDEO
OUT IN
IN FROM
ANT
OUT TO
TV
43
Caution
The unauthorized recording of satellite
broadcasts, television programs, or
other copyrighted materials may
infringe the rights of others.