Filter
Top Products
46
OTHER FEATURES
ON-SCREEN DISPLAYS
The INFO button sho ws the status of the VCR (ST OP, PLAY,
RECORD , etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
1. Press INFO to see all of the on-screen displays. These will
automatically time out after a few seconds
0:30:00
Hours
Minutes
Seconds
Stop Ch 05 0:30:00
11/18/97 Tue 01:30PM SLP
1
On-screen display
(times out)
TRACKING
Your VCR has automatic tracking which r emoves the streaks or
snow from the picture. Automatic tracking is activated when you
insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on a
different VCR. Just use the TRA CKING buttons to r emove the
streaks or snow. You can also use tracking when you pause a tape
to reduce jittering of the picture.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the VCR at the same time, or eject the
tape and re-insert it.
Tracking only effects playback—not recording.
For example, if you record a 30-minute program at the beginning
of the tape and you want to go to the end of that program to
begin another recording, you would:
1. Press INFO twice on the remote to display the time counter.
2. Press CLEAR to reset the time counter to 0:00:00.
3. Press FOR WARD (FWD) to f orward the tape until the time
counter reads 0:30:00.
4. Press ST OP. This is the approximate end of the program.
(You may want to press PLA Y to verify.) Now, you can begin
recording at this spot.
5. Press INFO to remove the time counter from the screen and
return to the normal display mode.