Filter
Top Products
Controlling a VCR
The VCR's remote controls compatible RCA, l'robc,m, or _,E VCRs with the VCR1
and VCR2oLDbuttons. Most compatible VCRs automatically respond to VCR1
without being programmed. If you own two compatible VCRs, test them to see if
VCR1 turns on both VCRs. If it does, then you may want to program this VCR to
respond to the VCR2.LD button on the remote.
Program the VCR for Remote Control
Set the REMOTE CONTROL feature of the VCR to the
VCR1 or VCR2 position. Then, the remote controls the
VCR with either the VCR1 or VCR2.LD button -- the
position you select in the menu.
1. Press MENUopROG to display the
VCR MAIN MENU.
2. Press 5 to display the PREFERENCES menu.
3. Press 1 to activate the REMOTE CONTROL feature.
4. Press VCR1 or VCR2oLDto change the setting and
program this VCR to respond to the VCR1 or
VCR2°LD button -- the position you select.
Important Reminder: Remember you must /
press VCR1 or VCR2°LD on the remote --II
the position you selected in the menu --_
before the remote will operate this VCR.
VCR MAIN MENU
VCR PLUS+
TIMER RECORDINGS
SET CLOCK
CHANNELS
PREFERENCES
PREFERENCES
1 REMOTE CONTROL: VCR1
2 AUTO PLAY: ON
3 AUTO TV/VCR: ON
3 FRONT PANEL: AUTO
4 AUTO DST: ON
5 SET AUTO REPEAT
0 EXIT
16