Filter
Top Products
Cable System With Cable Box to Unscramble All Channels
Position Cable Box
Position the remote-controllable cable box on
top of the VCR. You may need to position it
at different angles before the VCR can
control it. Make sure the cable box does not
cover the transmitting window on top of the
VCR.
AI
Basic hookup.
Use this hookup for a simple connection
which requires fewer accessories•
1.
Set the 3 CH. 4 switch on back of VCR to
either channel 3 or 4.
Tune the TVto this channel and use the
TV.VCR button to watch the VCR.
2.
3.
Connect as shown.
This connection may require additional
accessories not provided.
Plug in power cords of VCR, TV, and
cable box.
_l)i|lliii[_ll(l|l._j'_il{I
S,
Advanced hookup.
Use this hookup for slightly improved
picture quality and more convenient
operation -- use of the TVeVCR button is
not required.
1. Connect as shown.
This connection requires additional accessories
not provided.
2.
Plug in power cords of VCR, TV, and
cable box.
If your TV/monitor has an S-ViDEO connector,
also connect the supplied S-VHS cable to take
advantage of S-VHS.
If your TV is not stereo, you may need a
Y-adapter to hear sound from both channels.
(O]illnii![_il(oa_..-(;il[i_
4
Tune the TV to its video input to watch
the VCR. Set the AUTO TV/VCR feature to
OFF. See page 12 for details.
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
Transmitters
Cable I
RemoteSensor
Cable Box
From Cable .........................
co";i",$t. ........
Cable g
Back of
• i" INFROM A DID1
"" ") out TO TV _ R L
_ s'vHsA
/_,UdiONiaeQ.C_!,!e,.3" c_
VIDEO __ y f... :_,,]
RF Coaxia, Cab,e _ __
(supplied)
®. CCAOLE,
MONO _ ANTENNA
Back of TV