Filter
Top Products
R5505 15
Next, use these screws to attach the mounting brackets to the
unit. Depending on the installation location, you will orient
them either up or down.
Finally, attach the mounting brackets to the mounting surface
in a safe and secure fashion.
4. Installing the DVD player
Mounting the
DVD player
First, temporarily remove the Phillips side screws from the
unit as shown.
WARNING!
Always use great care when attaching
anything to a vehicle! Visually inspect all
sides of any potential screw location, to
insure no damage will occur. If you have
questions about this process, see your
authorized Rosen dealer.
CAUTION!
Do not overtighten the screws on uneven
surfaces! This can cause damage to the
unit. If an even mounting surface can-
not be found, fabricate a flat panel,
mount the unit to it, and mount that
panel to the vehicle