Filter
Top Products
17
English
Playing a Bonus Group on a
DVD AUDIO disc
Some DVD AUDIO discs contain a special
group called “bonus group” whose contents
are not opened to the public. The bonus group
is assigned to the last group of a disc. To play
back a bonus group, you have to enter a
specific “key number” for the bonus group.
A way of getting the key number depends on
discs.
1 In stop mode, press the numeric buttons to
select the bonus group number (the last
group). The display window and on-screen
display prompt you to enter the key num-
ber. The following box shows on the TV
screen.
KEY _ _ _ _
2 Press the numeric buttons to enter the key
number. If you enter the correct key num-
ber and press ENTER
35
, the RDV-1050
starts playback of the bonus group. If you
entered a wrong key number, you are
prompted to enter the correct key number.
To turn off the key number entry
display
Press ■ (STOP)
10
, open the disc tray,
or turn the power off.
• Once you enter the correct key number, the
unit memorizes it until you turn off the power
or open the disc tray.
• If you specify a track in the bonus group
for the program playback, you will also be
prompted to enter the key number during
program play.
• In the random playback, tracks in the bo-
nus group are not played back.
Changing Playback Order
Playing Tracks in a Specific
Order (Program Play)
By programming tracks, you can play up to
99 tracks in any order. You may program the
same track more than once.
1 In stop mode, press ON SCREEN
34
twice.
The menu bar appears on the TV screen.
2 Press /
13 33
to move to
PROG.
.
Screen example for Audio CD
3 Press ENTER
35
. The program table ap-
pears. The PRGM
indicator lights up
in the display window.
4 For DVD Audio Press the numeric but-
tons to specify selections in the desired order
by group and track numbers.
For each program step, specify a group first,
then a track. To specify track 14 in group
2: press 2, +10 then 4.
For SVCD/Video CD/Audio CD Press
the numeric buttons to specify the tracks in
the desired order.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Example of DVD Audio Programming Table
To correct the program press /
32 14
to move to the track to be corrected, then
press TV/VIDEO - CANCEL
23
. The track is
erased and the subsequent programmed tracks
move up. Pressing ■ (STOP)
10
clears all the
programmed tracks.
5 Press
(PLAY)
29
to start program play-
back. With an Audio CD disc, the program
table remains on the TV screen during pro-
gram playback. (Pressing ON SCREEN
brings up the status bar.)
When all of the programmed tracks have
finished playback, the RDV-1050 stops and
the program table appears again. Note that
the program remains.
NOTE: During program playback, you
cannot edit the program contents.
To Check the Program Contents
During playback, press ■ (STOP)
10
.
Playback stops and the program table is shown.
When the RDV-1050 is playing back an Au-
dio CD and the program table is not shown,
you can bring up the table by carrying out
steps 1 to 3.
During DVD Audio/SVCD/Video CD play-
back, you can check the program contents via
the menu bar.
To stop program playback
Press ■ (STOP)
10
.
To clear the program
While stopped and the program table is shown,
press ■ (STOP)
10
.
To exit the program mode
After clearing the program, press ON SCREEN
34
.
NOTES: When the disc tray is opened or the
RDV-1050 is turned off, the program is
cleared.
If you are going to program a track in the
bonus group of an AUDIO DVD, you will be
prompted to enter the key number for the bo-
nus group.
24
RDV-1050 DVD Player
Repeat Playback
To Repeat Title or Play List
During playback, press REPEAT
3
. Each time
you press REPEAT, one of the following repeat
mode is selected.
PG: Repeats the current title.
ALL: Repeats all titles on the disc.
OFF: Deactivates the repeat mode.
A window which indicates the current repeat
mode will be displayed on the TV screen. The
mode indication on the window is the same
as the one on the menu bar.
(Repeat mode example on the TV screen)
PG
On the display window, the following indication
appears:
1: When “PG” or “PL” repeat mode is
selected.
: When “ALL” repeat mode is selected.
To stop repeat playback press REPEAT
3
to
select “OFF.” Alternatively, press ■ (STOP)
10
to stop playback. The repeat mode will
be deactivated.
NOTE: You can change the repeat mode
using the menu bar. See the Menu Bar sec-
tion.
Changing the Sound
The audio selection setting allows you to change
the audio track(s) to be played back from
among stereo, L (left channel) and R (right
channel).
1 During playback, press the AUDIO - fs/Rate
button
24
. The audio selection window ap-
pears on the TV screen.
ST
ST
2 Press /
32 14
or the AUDIO - fs/Rate
button to select the audio output you want.
3 Press ENTER
35
.You will hear the selected
audio output. The audio selection window
disappears.
Turning the Subtitles On/Off
You can turn on or off the subtitle recorded
on a VR format disc.
1 During playback, press SUBTITLE
5
. The
subtitle selection window appears on the
TV screen.
2 Press /
32 14
or SUBTITLE to select
ON or OFF.
3 Press ENTER
35
. The subtitle is turned on
or off, according to the selection you made
at step 2. The subtitle selection window dis-
appears.
MP3/WMA Disc Playback
Make sure that the TV/DVD switch
1
on the
remote control is set to “DVD” when using the
, numeric and TV/VIDEO - CANCEL
buttons for controlling the RDV-1050.
The RDV-1050 can play back MP3 files and
WMA files on a home recorded CD-R/RW disc
or commercially available CD. We refer to a
disc that contains MP3 and/or WMA files as
an “MP3/WMA disc” in this manual.
If a disc contains both of MP3/WMA files and
JPEG files, you can only play back files of the
type selected by the MP3&WMA/JPEG set-
ting in the PICTURE preference display.
About MP3/WMA Discs
On an MP3/WMA disc, each song is recorded
as a file (track). Files are sometimes grouped
into folders by artists, album, etc.
• Each file is regarded as a track.
•A folder which has one or more files is re-
garded as a group.
•A folder which does not directly contain any
tracks is ignored.
• Files which do not belong to any folder are
grouped into “group 1.”
• The RDV-1050 recognizes up to 150 tracks
per group, and up to 99 groups per disc.
If there are files other than MP3/WMA files,
they also count in the 150-file total.
Notes For Making Your Own
MP3/WMA Disc Using a
CD-R/CD-RW Disc
• Select “ISO 9660” as the disc format.
• For MP3 files, we recommend you record
your material at a 44.1 kHz sampling rate,
using the 128 kbps data transfer rate.
• For WMA files, make sure that the copy-
right feature is set to off.
• For WMA files, we recommend you record
your material at a bit rate of 64 kbps or
higher.
Basic operations
Use the following buttons to control MP3/WMA
disc playback.
ENTER: Starts playback while stopped.
: Starts playback while stopped or
paused.
■: Stops playback.
II
: Pauses playback.
or Skips back or forward a track
: during playback. Selects the previ-
ous or next track while stopped.
If you press
(PLAY)
28
during playback,
or press ■ (STOP)
10
to stop playback fol-
lowed by
, the RDV-1050 starts playback
from the beginning of the current track.