Filter
Top Products
12
tions. When only one identifier appears, that
control is available only on the front-panel or
the remote, but not both.
The DVD functions available on the remote are
detailed in the sections of this manual describing
operation of the RDV-1080.
Setting the TV code
To use the RR-DV93 with your TV, you need
to program the command set for your TV by
entering a 2-digit code from the list in Figure
3. This need only be done once.
Find your TV brand in the code list and note
the 2-digit code(s):
1. Press and hold the TV/VIDEO button
,
keeping it pressed during Steps 2 and 3
below.
2. Enter the 2-digit code using the NUMERIC
keypad
. For example, to enter code
01, press 0, then 1.
3. Press the STOP
button to store the
selected code.
4. Release the TV/VIDEO button and test the
new code by pressing the TV POWER
button
. If the TV turns on and off, you
have programmed the correct code.
5. If the programmed code does not turn the
TV on or off, try a different code for the
brand of TV.
TV Functions
The following TV control functions are avail-
able on the RR-DV93 remote whenever the TV/
DVD switch is in the TV position:
TV POWER
: Turns the TV on or off.
TV/VIDEO
: Switches between the TV an-
tenna input and the video input on the TV set.
CH
: Changes the TV channel.
VOL