Filter
Top Products
22
To change the time display:
• While playback is stopped, press the ON-
SCREEN button to show the CONTROL
screen. The screen may appear slightly
different for different types of discs.
• Use the CURSOR buttons to move the
over the TIME SELECT field. The current
time display and mode are shown.
• Press ENTER to change the time display
mode. Each press steps to the next of four
options:
Each: The elapsed time for a single
Track
;
shows 00:00 when stopped.
Each Remain: The remaining time for a
single
Track
; shows the full length of a
Track
when stopped.
Total: The elapsed time for the entire disc;
shows 00:00 when stopped.
Total Remain: The remaining time for a
an entire disc; shows the full length of the
disc
when stopped.
• Press the ON-SCREEN button to close the
display window.
NOTE
: You can change the time display for an
Audio CD or a DVD Audio disc with audio
only during playback. All other disc types must
be stopped first.
Setting Preferences
The RDV-1080 provides a number of default
operating preferences that can be set by the
user. These include language preferences,
display options, hardware configuration set-
tings, and speaker settings to match the unit
to your system. These preferences are set from
a PREFERENCE screen that appears on TV.
How to Set Preferences
This section explains the general procedure
for changing preference settings. See the in-
dividual topics that follow for instructions on
changing specific settings.
• With no disc inserted in the unit, press
the ON-SCREEN button to show the PREF-
ERENCE screen.
• The screen gives access to three pages of
settings (PREFERENCE 1, PREFERENCE 2,
and SPK. SETTING) shown as tabs at the
top of the screen. Use the CURSOR
buttons to move the over the desired tab
to display one of the following three pages:
Preference 1: