Runco DTV-940/943 CRT Television User Manual


 
6-8
Random Access Adjustment Mode
GEOMETRY
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
SIZE
V LINEARITY
BLANKING
Select with
then <ENTER>
<EXIT> to return.
or
TOP - BOTTOM (N-S)
TOP - BOTTOM (N-S)
H CENTERLINE BOW
H CENTERLINE SKEW
TOP BOW
TOP KEYSTONE
BOTTOM KEYSTONE
BOTTOM BOW
Select with
then <ENTER>
<EXIT> to return.
or
Corrects for curvature of the horisontal lines in the middle
of the image.
Corrects the tilting of the horizontal lines in the middle of
the image.
Corrects for curvature of the horizontal lines on the upper
side.
Corrects the keystone geometry correction of the Hor. lines
on the upper side.
Corrects for curvature of the horizontal lines on the lower
side.
Corrects the keystone geometry correction of the hor. lines
on the lower side.
Correct by pushing
the control stick
backward.
Correct by pushing
the control stick
forward.
Top-Bottom (north-south) Adjustments
Top-Bottom and center adjustments affect only the horizontal
lines of the projected image.
To start up the Top-Bottom and center corrections, follow the
next procedure :
Push the control disc up or down to highlight TOP-BOTTOM
(N/S) on the geometry menu and then press ENTER.
Only the green image is displayed while making top-bottom
adjustments. The red and blue images will automatically be cor-
rected in the same manner. Convergence corrections are auto-
matically disabled for the duration of these adjustments.
The following adjustments can be executed
- Horizontal centerline bow
- Horizontal centerline skew
- Top bow
- Top keystone
- Bottom bow
- Bottom keystone
All adjustment are indicated on the screen with the function
name, a bar scale and a number between 0 and 100.
Adjust the next alignments until the vertical lines are straight.
To enter an alignment, push the control disc up or down to high-
light a function and press ENTER to activate this function.
Press EXIT to return.
TOP - BOTTOM (N-S)
H CENTERLINE BOW
H CENTERLINE SKEW
TOP KEYSTONE
TOP BOW
BOTTOM KEYSTONE
BOTTOM BOW
Select with
then <ENTER>
<EXIT> to return.
or