10-1
EYE-Q
TM
Autoconvergence
OVERVIEW
The EYE-Q
TM
auto-convergence system allows for faster and more accurate convergence when used by the installer upon initial instal-
lation. The EYE-Q
TM
system also allows the end-user to perform occasional convergence touch ups without having to learn the com-
plex convergence procedure using the TOUCH-UP option in the EYE-Q
TM
menu. By doing so, the end-user can be assured that the
image quality is always at its best.
To work correctly, the installer must complete geometry (setting green only) for one source which is the reference geometry. Every
memory that is auto-converged after that will use the same geometry as the reference. In most applications, however, multiple aspect
ratios are to be converged, each with its own unique geometry. In this case, the geometry for each aspect ratio needs to be completed
first, the EYE-Q
TM
will converge the red and blue colors to the green for each aspect ratio.
The last step is for the installer to touch-up the convergence using the fine convergence using the fine convergence adjustments for the
red and the blue. The EYE-Q
TM
is typically 95% accurate when doing a FULL AUTOCONVERGENCE adjustment, depending on
screen size and how well the initial EYE-Q
TM
setup was performed.
THE QUICK GUIDE to using the EYE-Q
TM
system:
Do geometry for the current memory bank (see geometry section)
Focus the lens in EYE-Q
TM
SETUP menu
Center the camera in EYE-Q
TM
SETUP menu
Learn reference in EYE-Q
TM
SETUP menu
Select AUTO-CONVERGENCE then ALIGN on current source from the EYE-Q
TM
menu
If all five steps were completed successfully, the projector will have already begun to converge red and blue automatically at this time.
Please read further for detailed instructions of each adjustment.