Runco DTV-940/943 CRT Television User Manual


 
7-5
Service Mode
Memory management
Highlight ‘Memory management’by pushing the control disc up or down and press
ENTER to display the memory management menu.
Within the memory management menu, the following items can be consolidated
or executed :
- copy a block
- delete a block
- delete all blocks
- all settings to midposition
- R&B convergence to mid
- Gr convergence mid (only if green convergence is available)
Copy a block
The copy a block function copies the settings of a selected block into the active
block.
Highlight copy a block with the control disc and press ENTER.
To copy the settings of a closed block to the block you are working on (active
block), use the control disc to select a block.
All existing settings will be overwritten with the new settings.
Press ENTER to copy the selected block. Aconfirmation screen will be displayed.
If you are certain you wish to copy the contents of the selected block into the
active block, press ENTER.
EXIT cancels the copy procedure and returns without copying the block.
ENTER displays a confirmation screen.
EXIT returns to the Service Mode main menu.
SERVICE MODE
PROJECTOR SET-UP
COMMON SETTINGS
12C DIAGNOSTICS
MEMORY MANAGEMENT
Select with
then <ENTER>
<EXIT> to return.
or
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
then <ENTER>
<EXIT> to return.
or
MEMORY MANAGEMENT
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
then <ENTER>
<EXIT> to return.
or
COPY A BLOCK
COPY MODE
Nr. Src Fh Fv inp conf
1 1 15.6 50 video FC
2 3 31.2 60 RGB3S RT
3 - 15.6 50 intern FC
4 2 31.5 50 RGB3S FC
5 - 33.7 60 intern FC
6
7
8
Active block nr.
1
Select with
then <ENTER>
<EXIT> to return.
or
COPY BLOCK
All settings
in current block
will be overwritten !
Select with
then <ENTER>
<EXIT> to return.
or
ENTER will select the highlighted item.
EXIT returns to the Path Selection main menu.
ADJUST returns to the Operational mode.