Filter
Top Products
Installation
32 Q-650i Series Installation/Operation Manual
PRE
L
IMINAR
Y
Connecting 12-Volt
Trigger Output to External
Theater Equipment
If your Q-650i is equipped with a CineWide with AutoScope system, connect the
AutoScope lens motor to a 12-volt trigger output on the projector; see
Figure 3-15.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger output.
Figure 3-15. Connecting 12-Volt Trigger Outputs
➤
Tip = +12V
Sleeve = Ground
AutoScope Lens Motor
3.5-mm
mini plug
AC Input
Power
Switch
Retractable Screen or other
12-volt trigger-activated
device