Filter
Top Products
Installation
24 Vistage™ Series Flat-Panel Display Installation/Operation Manual
PRE
L
IMINAR
Y
Connecting to AC Power The V-50HD/V-63HD ships with two (2), AC power cords: one for the DHD Controller and
one for the display.
1. Plug the female end of one of the power cords into the AC receptacle on the rear of
the V-50HD/V-63HD (AC 100V ~ 240V); see Figure 2-3.
2. Connect the other end to your AC power source.
3. Re-attach the AC input cover plate, routing the power cord through the slot on the
plate.
4. Connect the DHD Controller to a nearby AC outlet using the other AC power cord.
3.5
Turning on the Power
1. Power up your source components.
2. Press the ON button on the remote control to turn on the system. The front-panel
status indicator on the DHD Controller flashes blue to indicate that it is powering up.
3. When the display is ready for use, the front-panel status indicator on the DHD
Controller lights solid blue.
➤