Sampo DVE-560 DVD Player User Manual


 
19
ON-SCREEN DISPLAY (OSD)
p DVD OSD modes
Whenever the DISPLAY button is pressed, the OSD
mode changes among the following modes:
Mode 1
Only the status of pressed button and some special
playback messages are displayed. The OSD message
lasts only three seconds. For example, when the
OPEN/CLOSE button is pressed, the OSD message
becomes
Mode 2
Only title number, chapter number, and elapsed time are
displayed as shown below
Mode 3
Title number, chapter number, information of the sub-title
and the audio, and elapsed time are all displayed as
shown below
p CD/VCD OSD modes
The CD/VCD OSD modes are described as follows
When PBC is on
There are three OSD modes possible:
1 OFF mode only display the function status of the
pressed button or some messages.
1 SINGLE ELAPSED mode display elapsed time of
the playback sound track.
1 SINGLE REMAIN mode display remaining time
of the playback sound track.
When PBC is off or CD playback
Two more OSD modes are available:
1 TOTAL ELAPSED mode display elapsed time of
all disc.
1 TOTAL REMAIN mode display remaining time of
all disc.
The mode is displayed on the left top screen corner and
time is on the left bottom screen corner as shown below
TITLE 002/04 CHAPTER 02/05
SUBTITLE 01/06:ENGLISH
AUDIO 1/4:AC-3 2CH ENGLISH
TIME 00:10:00
TITLE 002/04 CHAPTER 02/05
TIME 00:10:00
OPEN
TOTAL REMAIN
TIME 00:10:00