Filter
Top Products
5
p Disc usage
1 Please hold all discs by their edges or the center
opening as shown below. Do not touch the shiny
signal surface of the discs.
1 Do not stick labels or tapes on the discs, and do not
scratch or damage the discs.
1 The unit spins the disc at high speed during playback.
Do not use damaged discs such as cracked or
warped ones because they could let the unit
damaged
p Disc cleaning
1 Fingerprints or dirt on disc surface can directly
influence the signal quality. That is because the
laser light being reflected from the disc surface may
be weakened. The poor the signal quality, the poor
the playback performance. Therefore, do keep the
disc clean by wiping straight out from the center with
a dry soft cloth.
1
1 If the disc is very dirty, apply a moist soft cloth to wipe
it first and then clean it with another dry soft cloth.
1 Do not use record cleaning sprays, benzene, thinner,
anti-static electricity liquids or any other solvent.
Those may make the disc surface damaged.
p Disc storage
1 Please keep the discs in boxes to avoid the discs
bent. Do not keep the discs in the locations with high
temperature, high humidity, or direct sunshine. Those
may cause damage to the discs.
1 Please read carefully the instructions on the disc
label.
p Unit cleaning
Please clean the front panel and the body of the unit
by dry soft clothes. The other areas can be cleaned
using soft clothes moistened with neutral detergent.
Do not clean by the evaporative solutions to avoid
possible damage to the unit.