Samsung 521 CRT Television User Manual


 
16
ENG
The Auto Store function makes channel storage easier and faster
than manual store.
This Auto Store can memorise on-air channels from present
channels in numerical order.
1 If the TV is in stand-by mode (red light on), press the “POWER” button on the
remote control. Press the “MENU” button and press CH or CH button to
place on the “Setup” option.
2 Press VOL+ or VOL– buttons then the “Setup” menu is displayed and
press CH or CH buttons to place on the “Auto store” option.
3 Press VOL+ or VOL– buttons and press CH or CH buttons to place
on the area where you live.
If you want start Auto store program number 20, before pressing
MENU, select program number 19 by pressing CHor CH buttons
or direct channel selection buttons (0~9).
4 Press the VOL+ or VOL–buttons.
The Television scans the VHF L, VHF H and UHF frequency bands in
turn and stores the available channels:
The progress of the scan is indicated by a horizontal bar & percentage.
The number of the channel currently being searched for and the
frequency being scanned are displayed.
When channel broadcasted is memorised, horizontal bar turns yellow.
After every channel broadcasted is memorised, “Sort” menu is
displayed.
At this point you can view real picture through Sub picture.
5 Press “MENU” button repeatedly until the menus disappear.
Programme mode (P)
When completing Auto Store, the broadcasting stations
in your area have been assigned to position number
from P00 to max P99. You can select a channel by
entering the position number in this mode.
Real Channel mode (C)
You can select a channel by the assigned number to
each air broadcasting station in this mode.
CATV channel mode (S)
You can select a channel by entering the assigned
number for each cable channel in this mode.
A
Menu
Picture
Sound
Time
Setup
Function
PinP
Sel. Enter
Setup
Auto store
Manual store
Channel skip
Fine tune
Sort
Sel. Enter
Asia/W. Europe
CIS/E. Europe
China
Hongkong/UK
Australia
NZ/Indonesia
South Africa
America
Sel. Set
* Searching *
Exit
P27
450MHz
50%
S.STD SURROUND S.MODE
P.STD MENU
P.MENU
CH
VOLVOL
SWAP CH SCAN STILL
ROTATEMULTIPinP
ON
Tuning Procedure (Auto store)
11318A#2 8/17/05 12:42 PM Page 16