Samsung 521 CRT Television User Manual


 
22
ENG
B
o
Y
e
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you
watch most often.
1 Press the MENU button and move to “Setup” option.
Press VOL + or VOL– buttons to display “Setup” menu.
2 Move to “Sort” option and press VOL+ or VOL– buttons to display “Sort”
menu. Then “Sort” menu is displayed on the “From” option.
3 Press VOL+ or VOL– buttons until the channel number that you wish to
change is displayed. Then the selected channel’s picture is displayed on
sub picture.
4 Press CHor CHbuttons to place on “To” option.
Press VOL+ and VOL– buttons until the new number by which you
wish to identify the channel is displayed. Then the selected channel is
exchanged with the one previously stored to the chosen number.
5 Here’s an example.
If you select “1” for the “From” option and “3” for the “To” option :
- Channel 1 becomes channel 3.
- Channel 3 becomes channel 1.
6 Move to Store line with the CHor CH button. Press the VOL+ or VOL–
buttons.
“OK” is displayed on the store line.
7 Move the channel to the programme number you desire by repeating the
process from No.3 to No.5.
8 When you have finished adding and erasing channels.
Press MENU repeatedly until the menus disappear.
If you change the programme number on the “From”
line after storing, the programme number on the “To”
line automatically increases by 1.
The existing channels of the programme number
displayed on “To” disappears when performing above
functions.
Menu
Picture
Sound
Time
Setup
Function
PinP
Sel. Enter
Setup
Auto store
Manual store
Channel skip
Fine tune
Sort
Sel. Enter
* Sort *
From : P 1
To : P 3
Store : ?
Sel. No. Set
* Sort *
From : P 1
To : P 3
Store : ?
Sel. No. Set
Tuning Procedure (Sort)
S.STD SURROUND S.MODE
P.STD MENU
P.MENU
CH
VOLVOL
SWAP CH SCAN STILL
ROTATEMULTIPinP
ON
11318A#3 8/17/05 12:44 PM Page 22