Samsung 521 CRT Television User Manual


 
9
ENG
Video Connections (cont.)
1 Connect an optional AUDIO/VIDEO cable from the VIDEO OUT jack on the rear of the VCR to the VIDEO IN jack on
the rear of the TV.
2 Connect another optional audio/video cable from the AUDIO OUT jacks on the rear of the VCR to the AUDIO IN jacks
on the rear of the TV.
If you have a VCR with 21 pin scart jack, connect scart cable to the rear of TV (Option).
3 Press the TV/VIDEO button to select “AV”.
As you press the button, TV, AV1, AV2, AV3, S-VIDEO1, and S-VIDEO2 are repeated alternately.
TV
S-VIDEO1
S-VIDEO2
AV1
AV2
AV3
if connected
4 Playback a tape in the VCR.
(See owner’s Manual for VCR)
Self Checkup Function
When all front and rear jack of this TV are disconnected, the video mode changes as
below.
TV
AV3
(When only AV1 Jack is connected)
TV
AV1
TV/Video Selection
Press the TV/VIDEO button repeatedly to select the desired input.
Whenever the TV/VIDEO button is pressed, the mode changes as below.
TV
S-VIDEO1
S-VIDEO2
AV3 AV2 AV1
(when all input jacks are connected)
When video mode is selected and that AV mode has no input picture signal, the
background colour of the TV screen will change to blue regardless of whether the BLUE-
SCREEN function is set.
Teletext displays on screen will not be output at the Monitor output terminal and Scart
output terminal.
AV mode isn’t selected when VCR wasn’t operating, so you must check VCR status before
selecting AV mode.
➞➞
11318A#2 8/17/05 12:42 PM Page 9