Filter
Top Products
23
ENG
By pressing the P.STD button, you can sequentially select any one
of the five possible preferred analogue picture presets.
1 Press the P.STD button.
◆
Whenever this button is pressed, the mode will be changed as follows.
➞
Custom
➞
Standard
➞
Dynamic
➞
Movie
➞
Mild
Custom
Select this mode to view the adjusted picture you want.
Standard
Select this mode to view the factory-preset standard
picture.
Dynamic ◆
Select this mode to view a powerful and clear picture.
◆
For watching in brighter (day light) environments.
Movie
Select this mode to enjoy the atmosphere as if you were in
a movie theatre.
Mild ◆
Select this mode
- To emphasize mildness.
- When the surrounding are dark.
- To decrease eye fatigue.
You can sequentially select and adjust one of five picture levels.
◆ Contrast, Brightness, Colour, Sharpness or Tint (NTSC only)
e.g. Contrast Adjustment
1 Press the MENU button. Move to “Picture” option by pressing the CH▲ or
CH▼ buttons and press the VOL+ or VOL– buttons.
2 Move to “Contrast” by pressing the CH▲ or CH▼ buttons and press the
VOL+ or VOL– buttons.
3 Adjust 100 “Contrast” by VOL+ or VOL– buttons.
4 When you have finished contrast adjustment, press Menu repeatedly until
the menus disappear.
➣
In the circumstances of colour broadcasting, the colour
does not disappear completely even if you minimize the
colour control level.
rt”
to
on
L–
he
P/C
-/--
0
S.STD SURROUND S.MODE
P.STD MENU
P.MENU
CH
VOLVOL
Picture Adjustment
Picture
100 Contrast
50 Brightness
50 Sharpness
50 Colour
Sel. Adjust
Contrast 100
Custom
S.STD SURROUND S.MODE
P.STD MENU
P.MENU
CH
VOLVOL
SWAP CH SCAN STILL
ROTATEMULTIPinP
ON
11318A#3 8/17/05 12:44 PM Page 23