Filter
Top Products
English - 80
Securing the TV to a Wall
[
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do
not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death.
Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device
for safety purposes, as follows.
To prevent the TV from falling:
1. Put the screws into the clamps and rmly fasten them onto the wall. Conrm that
the screws have been rmly installed onto the wall.
You may need additional material such as an anchor depending on the type
of wall.
Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
2.
Remove the screws from the centre back of the TV, put the screws into the
clamps, and then fasten the screws onto the TV again.
Screws may not be supplied with the product. In this case, please purchase
the screws of the following specifications.
Screw Specifications
For a 32 ~ 40 inch LED TV: M6 X L15 /
For a 40 ~ 55 inch LED TV: M8 X L30
3.
Connect the clamps xed onto the TV and the clamps xed onto the wall with a
strong string and then tie the string tightly.
Install the TV near to the wall so that it does not fall backwards.
It is safe to connect the string so that the clamps fixed on the wall are equal to
or lower than the clamps fixed on the TV.
Untie the string before moving the TV.
4.
Verify all connections are properly secured. Periodically check connections for
any sign of fatigue for failure. If you have any doubt about the security of your
connections, contact a professional installer.
¦
N
N
N
N
N
N
N
wall
wall
[7000-SA]BN68-01988C-Eng.indb 80 2009-03-31 �� 8:04:09