Filter
Top Products
10
Note: If this DVR is used with the Wireless Colour Camera CCTV Kit (CWFK1), the video
output from the receiver can be connected to either channel 1, channel 2, channel 3 or
channel 4, to view the wireless camera.
5.4 Mouse Connection
Connect the PS/2 mouse to the port shown on the DVR. Note the
PS/2 mouse must be connected to DVR before it is powered up.
5.5 DVR Power Connection
Connect the power adaptor's output plug into the DVR to power the DVR. Connect the
power adaptor’s mains lead into the adaptor and plug into the main’s (240VAC) wall socket
and switch ON.
The DVR will boot up.
The screen shown in Fig. 5.01 will be
displayed during boot up.
After the system has booted up, the DVR
will display the monitor in quad mode.
VIDEO INPUT
"VIDEO IN" on DVR
"VIDEO OUT" on Camera
Camera Power
Supply Adaptor
DVRs Power
Supply Adaptor
Video output from
Camera to DVR
CH1 CH2 CH3 CH4
PS/2 Mouse Port
Fig. 5.01