Filter
Top Products
25
BACKUP VIA USB MEMORY STICK Section 8
Note: The USB memory stick is not supplied with this kit. Please purchase only the
listed USB models in the Appendix section (11.1) as only they are compatible with
this DVR.
The DVR system has an enhanced back-up feature so that it’s possible to transfer the
video data image recorded on the hard drive to a USB memory stick.
You must format the USB stick to a ‘FAT32’ File system from a PC first. This can be done
as follows:
1. Insert the USB stick into the USB slot on the PC.
2. Move the cursor on to the ‘
My Computer’ icon on the desktop and click
the right mouse button.
3. Move the cursor on to the (
F:) drive, click the right mouse button and select
‘
Format…’from the menu.
4. Move the cursor on to File system and select ‘
FAT32’by clicking the
left mouse button.
5. Select ‘
Start’ to begin the format process.
6. After the process is complete, the USB stick is now ready to use with your DVR.
Before you back up a stream of video data, have the USB memory stick ready and attach
it into the USB port located on the rear panel of the DVR.
In order to save the video data with the back-up device, you should first start with playback
from the required time you wish to back-up (See PLAYBACK WITH TIME SEARCH
FUNCTION section). During playback, press the [MENU] button. Use the [UP] key or
[DOWN] key to move to 'Start time’ or ‘End time’ and press [SEL] button to set the start
and end times of the recorded video data which will be saved on the back-up device.
Whilst playing back, if you want to setup the end time faster, you can press the
[
FWD] button to fast forward the video being played to the desired end time, and then
press [SEL] to select the end time again on the screen again.
Move to “USB copy”, and press the [SEL]
button or click the left mouse button to
back up the selected stream of video data
on to the USB memory stick (Fig. 8.01).
Fig. 8.01