Filter
Top Products
15
period. The user can select the same record method for the whole 24hr period in one go.
Move the cursor to 24 and press [QUAD] button in the DVR front panel, or left click the
mouse button on the time period 24.
- Grey bar: No recording will be made for this time period unless the user activates
manual recording.
- Red bar: The time period with a red bar will activate continuous recording mode (Time
record) unless there is any manual stopping during that period.
- Green bar: The time period with a green bar is for built-in motion recording. (See also
the following chapter “MOTION DETECTION”).
6.3 Alarm (Optional)
An internal buzzer built in the DVR will activate to alert the user that motion has been
detected by a Camera.
Press the [SEL] button or using the left mouse button, click icon “
”/ “
”, to adjust
parameters of each option.
6.3.1 [BUZZER DURATION]
This sets the buzzer duration time (in
seconds) after an alarm is activated.
Selection values are “05, 10, 15, 20, 25, 30,
cont, off” (in seconds). Default at “off”
(Fig. 6.09).
When “buzzer duration” is “cont”, the
buzzer will sound continuously.
Fig. 6.08
Grey bar
Red bar
Green bar
Fig. 6.09