Filter
Top Products
26
You can:
◆
Rewind or fast-forward a cassette without seeing the
picture on the television
◆
Search for a given sequence forwards or backwards on
the tape
To... Then press...
Rewind the tape without REW ( ) when the cassette is stopped.
viewing the picture
Rewind the tape while REW ( ) when the cassette is playing.
viewing the picture
(Reverse Search function)
Switch from reverse searching REW ( ) while rewinding the tape
to playback again with the picture displayed.
Fast-forward the tape without FF ( ) when the cassette is stopped.
viewing the picture
Fast-forward the tape while FF ( ) when the cassette is playing.
viewing the picture
(Forward Search function)
Switch from forward searching FF ( ) while fast-forwarding the tape
to playback again with the picture displayed.
➢
◆ When pressing the REW( ) or FF( ) buttons for
more than 2 seconds in the “PLAY” or “RPS/FPS
(Reverse Picture Search / Forward Picture Search)”
modes speed up. Normal speed resumes (“PLAY”)
when the REW( ) or FF( ) buttons are released.
◆ The cassette is rewound automatically when the end
of the tape is reached.
If you press POWER ( ) while a cassette is being
rewound, the COMBI VISION switches automatically
to Standby mode and the cassette continues
rewinding until the beginning of the tape is reached.
Rewinding and Fast-forwarding a Cassette
P10 2:19:43
SP
GB
Selecting the Type of Cassette Tape
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1 Press V.MENU ( ) to display the VCR menu.
2 Select the TAPE SELECT option by pressing the P ▲ or ▼ buttons the
required number of times.
3 Press + or - to select type of cassette tape.
➞
E180/T120
➞
E240/T160
➞
E260/T180
➞
E300
VCR MENU
RECORD PROGRAMME
REPEAT : OFF
PICTURE : NORMAL
TAPE SELECT : E180/T120
V.SYSTEM : AUTO
ADJUST SELECT EXIT
Pre.
V.MENU MUTE
P
02255A_eng2_mono 6/29/04 10:45 AM Page 26