Filter
Top Products
30
Using the Feature (depending on the model)
TM
Before presetting your VCR unit:
◆ Check that the language, date and time are correct
(if the clock has not been set, the Date/Time Setting
function is activated automatically)
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1 Press the
VIDEOPLUS
button.
Result:A message is displayed to allow you to enter the VIDEOPLUS
code.
☛ If there is no VIDEOPLUS button on your remote control, the
VIDEOPLUS feature is not available on your model. If all six
programmes have been set, the list of preset recordings is
displayed to enable you to modify an existing recording or clear one
that you no longer require. Refer to page 34 for further details.
2 Press the numeric buttons to enter the code opposite the programme that
you wish to record in your television magazine.
➢ If you wish to correct the VIDEOPLUS code that you are entering:
◆
Press the - button until the digit to be corrected is cleared
◆ Enter the correct digit
3 Press the V.MENU ( ) button.
Result: The information concerning the programme is displayed.
☛ When using the VIDEOPLUS function for the first time with stored
stations, the programme number flashes. This one time, you must
enter the number manually.
4 If necessary, enter the channel number by pressing the appropriate
numeric buttons.
5 When you are satisfied, press the P ▼ button.
6 If necessary, modify the start time by pressing the appropriate numeric
buttons. When you are satisfied, press the P
▼ button.
☛ When entering the date and time, all single digits must be preceded
by a zero.
Example
: 7:30 am
Enter 0
7:30
If an invalid number is entered, the previous value is redisplayed.
Enter the information again. If you make a mistake, press the
- button several times to move backwards until the incorrect digit is
cleared and then enter the correct number.
continued...
GB
VIDEO PLUS
CODE - - - - - - - - -
CODE CORRECT END
15:07 06/04/00 THU
PR. : 01
START : 16:50
STOP : 18:30
DATE : 08/04 SAT
MODE : ONCE
DECODER : OFF
SPEED : SP
PDC : OFF
ADJUST SELECT EXIT
REC
TRK CLEAR
TV/TEXT
LANG.SEL
EJECT
INDEX SLEEPMEMORY
P/S
CRYSTAL PB
V.MENU MUTE
DISPLAY P.STD
MENU
P
P
02255A_eng3_mono 6/29/04 10:47 AM Page 30