Filter
Top Products
15
Once you have stored the channels on your COMBI VISION,
you can select them easily via your remote control.
To switch... Press...
To the next station P ▲.
To the previous station P ▼.
To the station of your choice The appropriate numeric button(s);
see the section below for further details.
Repeatedly between the last PRE-CH ( ) as many times as you require.
two stations displayed
When selecting a station stored at programme position ten or
higher, follow the instructions below.
1 Press the
-/--
button on the remote control.
Result: P-- is displayed in the top left-hand corner of the screen.
2 Enter the two-digit station number.
Example: To select station 42, press 4 followed by 2.
3 To enter one-digit station numbers:
◆ Precede the number with a zero (0)
or
◆ Press the -/-- button again
Result: P- is displayed; you can now enter the required one-digit
number without a zero.
Changing Stations
Selecting a Station Numbered Ten or Over
P 02
P--
V.MENU MUTE
DISPLAY P.STD
MENU
P
P
Pre.
Pre.
02255A_eng2_mono 6/29/04 10:45 AM Page 15