Filter
Top Products
32
This function enables you to preset the VCR unit to record a
programme up to one month before that programme is to be
broadcast. Up to six programmes can be preset.
You must provide the following information on the broadcast to be
recorded:
◆ Programme number
◆ Recording speed (LP option)
◆ Start time
◆ End time
◆ Date
◆ Recording mode (once, daily, weekly)
◆ Optional use of a decoder
Before presetting your VCR:
◆ Check that the language, date and time are correct (if
the clock has not been set, the Date/Time Setting
function is activated automatically)
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
1 Press V.MENU ( ).
Result: The VCR menu is displayed.
2 Select the RECORD PROGRAMME option by pressing the + button.
Result: The list of preset recordings is displayed.
3 Select a line that is free (no recording set) by pressing the P ▲ or ▼
buttons one or more times.
4 Press the + button to confirm your selection.
Result: The list of information to be entered for the recording is
displayed with preset values.
5 Enter the channel number by pressing the appropriate numeric buttons or
press INPUT ( ) to select the AV input.
6 Specify the start time by pressing the appropriate numeric buttons. When
you are satisfied, press the P
▼ button.
☛ When entering the date and time, all single digits must be preceded
by a zero.
Example: 7:30 am
Enter 07:30
If an invalid number is entered, the previous value is redisplayed.
Enter the information again. If you make a mistake, press the
- button several times to move backwards until the incorrect digit is
cleared and then enter the correct number.
Setting the VCR Unit to Record ...
VCR MENU
RECORD PROGRAMME
REPEAT : OFF
PICTURE : NORMAL
TAPE SELECT : E180/T120
V.SYSTEM : AUTO
ADJUST SELECT EXIT
PR. START STOP DATE
-- --:-- --:-- --/--
-- --:-- --:-- --/--
-- --:-- --:-- --/--
-- --:-- --:-- --/--
-- --:-- --:-- --/--
-- --:-- --:-- --/--
X:CLEAR EXIT
ADJUST SELECT
15:07 06/04/00 THU
PR. : 01
START : 16:50
STOP : 18:30
DATE : 08/04 SAT
MODE : ONCE
DECODER : ON
SPEED : SP
PDC : OFF
ADJUST SELECT EXIT
GB
V.MENU MUTE
DISPLAY P.STD
MENU
P
P
02255A_eng3_mono 6/29/04 10:47 AM Page 32