Filter
Top Products
DCB-9401V
GB-26
DCB-9401V
GB-27
DIGITAL CABLE RECEIVER
GB
OPERATING THE RECEIVER OPERATING THE RECEIVER
4.4 Time & Timer Setting
1) Time
● Place the cursor on this sub menu.
● Press
ᮤ
/
ᮣ
to change local time in Time Zone.
GMT is referred to the standard time of Greenwich by
broadcasting signal. This cannot be changed.
2) Timer
15 timers are supported including timer(s) from EPG.
● Select the timer number on ‘Timer’ using
ᮤ
/
ᮣ
keys from 1 to 15.
● Press the
ᮤ
/
ᮣ
keys to choose event repetition you want to
reserve : Daily, Every Sunday, Every Monday, Every Tuesday,
Every Wednesday, Every Thursday, Every Friday, Every Saturday, Once.
If the timer is set from EPG screen, EPG is displayed on ‘Event Repetition’.
● Press the Numerical (0~9) keys to set the time you want and press the
ᮤ
/
ᮣ
keys to choose a switch time you want to reserve. If set time on ‘Switch-on
Time’ is same as one on ’Switch-off Time’, this timer works for 24 hours.
● Select TV program to set the event program by pressing
ᮤ
/
ᮣ
keys.
When you press the TV/RADIO key, TV program and Radio program are toggled.
● Even you can set timers on Daily and Every Monday or Every Sunday, etc.
The priority has the repetition event which is less. For example, when you set timers
on Once and daily, ‘Once’ will work instead of ‘Daily’ at that day. If the timer is
running, ‘Running’ message with a timer number is displayed on ‘Timer’.
4.5 System Information
If you have to contact your service provider or a service center
they might ask for information available from this menu.
Place the cursor on this sub menu and press the OK key.
The following will be the on-screen display.
4.6 Software Upgrade
You can download and upgrade the system software of the
receiver through a specific channel through a specific channel
designated by the broadcaster.
The distributor will provide you with more information about that.
If you select to download a new software version, all your previous
settings, access code and favorite channels etc. will be erased!
Downloading may take a while.
During downloading, don’t turn off the receiver.
You can select Auto or Manual mode to upgrade the software.
If you select the Manual mode, you can set the channel frequency
and the symbol rate for the software upgrade.
5. Embedded Viaccess
1. Change smart card PIN Code:
Change the PIN code of the Smartcard, if necessary.
2. Change Parental Rating:
Change the setting for the family filter, if necessary.
NNoottee
: This service is not offered by all channels.
3. Change Lock Indicator:
You can change the lock status of the Viaccess Smartcard.
4. Issuer Information:
Here you can call up all information stored on the Smartcard
by the publisher.
5. Authorization:
This option would indicate the authorization status of the
Smartcard.
MF68-00354A(REV1.2)_GB 6/30/05 1:48 PM Page 26