Samsung DCB-9401V Cable Box User Manual


 
DCB-9401V
DCB-9401V
DESCRIPTION
GB-9GB-8
DIGITAL CABLE RECEIVER
GB
1. CABLE IN This port is to connect the coaxial cable from your cable system.
2. LOOP To enable the connection of an Analog receiver.
The receiver is provided with this “LOOP” port.
3. AV1 (TV) This is used to connect to your TV.
4. AV2 (EXT) This is used to connect to your VCR.
5. DIGITAL AUDIO OUT Output for connection to a digital amplifier.
6. AC MAINS This is to plug in the AC mains power cord.
The input AC voltage range is 100V to 240V, 50Hz/60Hz supply.
Rear PanelFront Panel
1. Infrared Sensor This is to receive the IR commands from the Remote Control Unit.
2. LED When the LED light Red, the Set-Top Box enters the standby mode.
When the LED light Green, it enters the operation mode.
3. Smart Card Slot 1 slot for Viaccess smartcard.
NNoottee : Smart Cards are only distributed by service providers and special distributors,
not by SAMSUNG.
2
31
5 64
321
DESCRIPTION
MF68-00354A(REV1.2)_GB 6/30/05 1:47 PM Page 8