Filter
Top Products
14
ENG
When the television is initially powered on, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Result
: The Plug & Play is displayed.
2 To start the Plug & Play, press the ENTER button.
Result
: The Language menu is displayed.
3 Select the appropriate language by pressing the † or … button.
Press the MENU button to confirm your choice.
Result
: The message Antenna input check is displayed.
4 Make sure that the antenna is connected to the TV. Press the
MENU button
Result
: The Time menu is displayed with Clock is selected.
5 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the † or … button.
Result
: Refer to “Setting the Current Date and Time” on page
28.
6 When the setting has finished all, the message Enjoy viewing
your new TV is displayed.
Plug and Play Feature
Plug & Play
ENJOY YOUR WATCHING
Ant. Input : Check
Time
Clock - - : - -
Move Exit
Search Exit
Language
English Español
Deutsch Português
Français Italiano
Nederland Sverige
Adjust Select
C19A_ENG_03244A 1/20/04 11:54 AM Page 14