Filter
Top Products
6
C. Connecting to an Audio System (2 Channel, Dolby Digital, or MPEG2)
1. Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD
player to the AUDIO (red and white) IN jacks of the Amplifier. If using a Coaxial cable, connect
the DIGITAL AUDIO (COAXIAL) jack on the rear of the DVD player to the DIGITAL AUDIO IN
(COAXIAL) jack of the Amplifier.
2. Using the video signal cable(s), connect the COMPONENT or VIDEO OUT jacks on the rear of the
DVD player to the COMPONENT or VIDEO IN jacks of your TV.
3. Turn on your DVD player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select the audio input your DVD player is connected
to in order to hear sound. Refer to your Amplifier's user manual to set the Amplifier's audio input.
◄ C
◄ A
◄ B
Video Cable
Component
Cable
WHITE
YELLOW
YELLOW
RED
BLUE
GREEN
RED
BLUE
GREEN
RED
WHITE
Audio Cable
RED
RED
WHITE
2-Channel stereo ampilfier
or Dolby Digital
Coaxial Cable
RED
WHITE
Audio Cable
DVD-E360
CONNECTIONS
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to the
next selection.
Searching through a Chapter or Track
During play, press the SEARCH ( or ) button on the remote control for more than 1 second
- If you want to search at a faster speed on the DVD or CD, press the SEARCH button.
Using the Tool Button Display Functions
When Playing a DVD/MPEG4
1. During play, press the TOOLS button on the remote control.
2. Press the π/† buttons to select the desired item.
Notes
- The speed marked in this function may be different from the actual
playback speed.
- No sound is heard during search mode (Except CD).
Skipping Tracks
During play, press the SKIP (
or
) button.
- When playing a DVD, if you press the SKIP (
) button, it moves to the next chapter. If you press
the SKIP (
) button, it moves to the beginning of the chapter. Pressing the Skip ( ) button twice
makes the DVD move to the beginning of the previous chapter.
- When playing a CD, if you press the SKIP (
) button, it moves to the next track. If you press the
SKIP (
) button, it moves to the beginning of the track. Pressing the Skip ( ) button twice makes
the CD move to the beginning of the previous track.
DVD
CD
2X, 4X, 8X, 16X, 32X
2X, 4X, 8X, 16X, 32X
Basic functions
Playing a Disc
Before Play
- Using your TV’s remote control, turn on your TV and set it to the Video Input your DVD player
is connected to.
- If you connected the DVD player to an external Audio System, turn on your Audio System and
set it to the correct Audio Input.
Selecting a Language
After plugging in the player, the first time you press the DVD POWER
button, the screen to the right appears. If you want to select a language,
press the π/† button, and then press the ENTER button. (This screen
will only appear when you plug in the player for the first time.) If you do
not set the language on this screen, the settings may change whenever
you turn the power on or off. Therefore, make sure that you select the
language you want to use.
Once you select a menu language, you can change it by pressing the
®||
button on the front panel of the unit for more than 5 seconds with no disc in the unit. The SELECT
MENU LANGUAGE window appears again and you can reset to your preferred language.
On - Screen Menu
Macrovision Number: J892
English
Français
Deutsch
Español
Italiano
Nederlands
Select