10_ Reference
Reference
If your product malfunctions, go through the checkpoints below before contacting a Samsung authorised service
centre.
The HDD & DVD Recorder requires some time to initialise and the input will be
displayed for approx. 10 seconds after it is turned on.
• Check whether the power cord is securely plugged into the power outlet.
• Did you set the HDD & DVD Recorder channel settings correctly?
• Check the free space on your HDD/DVD-RAM/±RW/±R discs.
Check available disc type. (See page 69)
If a programme is copy protected, it cannot be recorded.
• Check whether the disc is inserted correctly with the label facing up.
• Check the regional code of the DVD disc.
• This HDD & DVD Recorder cannot play some types of discs. (See pages 8, 53)
You cannot use this operation or function due to one of the following reasons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support this feature (for example: angles)
(3) The feature is not available at the moment.
(4) You’ve requested a title, chapter, or scan time that is out of range.
The disc does not support all selected functions.
In this case, some settings congured in the settings menu may not work properly.
The aspect ratio is xed for DVD discs. (See page 43)
The angle operation is available only when the disc contains images captured from
diff erent angles.
Audio and subtitle languages are disc-specic. Only the sound and subtitle languages
contained on the DVD disc are available and displayed in the disc menu.
• DVD discs encoded with copy protection can not be copied to HDD.
• Refer to “Contents Copy Specications” on page 7 to check if copying is supported.
• Refer to “V-Mode Compatibility” on page 48 to check if copying is support.
• Be sure that the Video Setting is properly set. (See pages 43~44)
• Check whether there is damage to or any foreign material on your disc.
• Some low quality discs may not play properly.
• If scenes change from dark to bright suddenly, the screen may shake vertically
temporarily, but this is not a fault.