Samsung DVD-V9800 DVD Player User Manual


 
ENG-80
VCR O
PERATIONS
Chapter 6
R
EFERENCE
Using the TV Buttons on the Remote Control
Your DVD-VCR remote control will work with Samsung televisions and compatible brands.
To determine whether your television is compatible, follow the instructions below.
1 Switch your television on.
2 Point the remote control towards the television.
3 Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by
pressing the appropriate numeric buttons.
BRAND CODE
SAMSUNG 01, 14, 15, 23
DAEWOO 19
EMERSON 21
HITACHI 10
LG 06, 08, 18
LOEWE 28
MAGNAVOX 04
NEWSAN 27
NOBLEX 25
PANASONIC 12, 24
RCA 07, 29
SANYO 05, 20
SHARP 02, 16, 22
SONY 03
TELEFUNKEN 26
TOSHIBA 09
ZENITH 17
TV Codes
Button Function
POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
TV VOL + or – Used to adjust the volume of the television.
TV CH ( or ) Used to select the required channel.
TV MUTE Used to toggle the sound on and off.
Note
-
If your television is compatible with the remote control, it will switch off. It is now programmed to operate
with the remote control.
-
If several codes are indicated for your television brand, try each one in turn until you find one that works.
You can then control the television using the following buttons.
The various functions will not necessarily work on all televisions. If you encounter problems, operate the
television directly.
00000X_V9800_XAA_Eng3 1/23/08 3:59 PM Page 80