Filter
Top Products
English - 44
Playback
Using the Markers
Setting Markers
1. Press the MARKER button during playback.
2. Press the ENTER button when the desired scene appears.
• The number 01 is displayed and the scene is memorized.
3. Press the ◄► button to move to the next position.
4. Press the ENTER button again when the desired scene appears.
• The number 02 is displayed and the scene is memorized.
• DVD-RAM or DVD-RW (VR Mode) discs have the Marker function
instead of the Bookmark function. The Marker function allows you to
mark up to 99 scenes. Since the scenes may be displayed as many
different pages, numbering is necessary. If a disc in use is encoded
with Disc Protect, Markers cannot be set or deleted. Only playback is
available.
Playing Back a Marker
1. Press the MARKER button during playback.
2. Press the ◄► buttons to select a marked scene.
3. Press the ENTER or ►ll button to start playing from the selected scene.
• If you press the NEXT SKIP(►►l) button or the PREVIOUS SKIP(l◄◄ )
button in marker mode, and the next or current marked point plays for
shorter than three seconds, playback starts from the previous marked
point.
Clearing a Marker
1. Press the MARKER button during playback.
2. Press the ◄ ► buttons to select a marked scene.
Press the CANCEL button to delete the selected mark.
• When a marker is cleared while a DVD-RAM/DVD-RW(VR mode) is
playing, marker numbers will change. For example, if the 7th marker
is cleared after ten markers are registered, the marker numbers after
the eighth will automatically move ahead by one and the 8th marker
becomes the 7th.
▌
▌
▌
(VR mode)
MOVE PLAY CANCEL RETURN
Marker
01
02
-- -- -- -- -- -- -- --
N : 2
MOVE PLAY CANCEL RETURN
Marker
01
02
-- -- -- -- -- -- -- --
N : 2
MOVE PLAY CANCEL RETURN
Marker
01 02 03 04 05 06 07 08 09 10
►
N : 10
Marker
01 02 03 04 05 06 07 08 09
--
N : 9
01287A(01)-VR357-XAA-ENG.indb 4401287A(01)-VR357-XAA-ENG.indb 44 2007-01-22 오전 10:37:362007-01-22 오전 10:37:36