Getting Started
English - 9
Before Reading the User’s Manual
Make sure to check the following terms before reading
the user’s manual.
Icons that will be used in manual
Icon Term Defi nition
DVD
This involves a function available
with DVD or DVD-R/DVD-RW(V)/+R
discs that have been recorded and
fi nalized.
RAM
This involves a function available
with DVD-RAM discs.
-RW
This involves a function available
with DVD-RW discs.
-R
This involves a function available
with DVD-R discs.
+RW
This involves a function available
with DVD+RW discs.
+R
This involves a function available
with DVD+R discs.
CD
This involves a function available
with a data CD (CD-R or CD-RW).
JPEG
This involves a JPEG function
available with CD-R/-RW or
DVD±R/±RW/-RAM discs.
MP3
This involves an MP3 function
available with CD-R/-RW or
DVD±R/±RW/-RAM discs.
MPEG4
This involves an MPEG4 function
available with DVD±R/±RW/-RAM
discs.
Caution
This involves a case where a
function does not operate or
settings may be cancelled.
NOTE
This involves tips or instructions on
the page that help each function
operate.
One-Touch
button
A function that can be operated by
using only one button.
ANYKEY
button
A function that can be operated by
using ANYKEY button.
About the use of this user’s manual
1) Be sure to be familiarize yourself with the Safety
Instructions before using this product. (See pages 2~5)
2) If a problem occurs, check the Troubleshooting section.
(See pages 78~80)
Copyright
©2007 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.
How to use the DVD Recorder & VCR
Step 1 : Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or you
want to edit the disc after recording, select a rewritable
DVD±RW or DVD-RAM type disc. If you want to save a
recording without making any changes, choose a non-
rewritable DVD±R.
Step 2 : Format the disc to start recording
Unlike a VCR, the recorder automatically starts formatting
when an unused disc is inserted. This is required for the
preparation of recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit recorded
images and create a playlist in a specifi c sequence
according to your requirements.
Using a DVD±RW/+R
• When an unused DVD±RW/+R disc is fi rst inserted, the
message "Uninitialized Disc. Do you want to initialize this
disc?" will be displayed.
If you select Yes, initializing will be begin. DVD-RW discs
can be formatted in either DVD-Video format (Video
mode) or DVD-Video Recording format (VR mode)
• There are no differences between DVD-Video format
(Video mode) and DVD-Video Recording format (VR
mode) with DVD+R discs.
Using a DVD-R
When using a DVD-R disc, only V mode recording is
possible and no initialization is needed to play it on this
recorder. However, fi nalization is necessary to play this
disc on other DVD players.
You can only use either the VR or Video mode on
a DVD-RW, but not both at the same time.
You can format a DVD-RW to V or VR mode using
disc manager.
It should be noted that the disc's data will be lost
when changing formats.
Step 3 : Recording
There are two different recording methods: Direct
Recording and Timer Recording. Timer recording is
determined as a date and recording can be done once,
daily or weekly. There are 4 recording modes : XP (high
quality mode), SP (standard quality mode), LP (long
recording mode), and EP (extended mode).
▌
▌
■
■
▌
01287A(01)-VR357-XAA-ENG.indb 901287A(01)-VR357-XAA-ENG.indb 9 2007-01-22 오전 10:36:202007-01-22 오전 10:36:20