Filter
Top Products
English - 25
OPERATION
3
Press the ENTER button.
A crosshatch pattern will appear
on the screen.
Move the cursor to the position
you want to adjust by pressing the
▲/▼/œ/√ buttons, then press the
ENTER button.
Adjust the convergence by
pressing the ▲/▼/œ/√ buttons,
then press the ENTER button.
Red
œœ √√
Move Enter Return
Please, use remote control.
4
If a horizontal line is visible, use the
▲ or ▼ button to move the line so
that it is superimposed on the
horizontal center-line (i.e., make a
single horizontal line that is as white
as possible.).
Red
œœ √√
Adjust Enter Return
Please, use remote control.
5
If a vertical red is visible, use the
œ or √ button to move the line so
that it is superimposed on the
vertical-center line (i.e., make a
single vertical line that is as white as
possible.)
After the convergence is correctly
adjusted, press the MENU button to
exit.
Red
œœ √√
Adjust Enter Return
Please, use remote control.
6
To return to the factory defaults,
select “Reset” by pressing the
▲ or ▼ button, then press the
ENTER button.
The previously adjusted
convergence will be reset to the
factory defaults.
Red
œœ √√
Adjust Enter Return
Please, use remote control.
TV Manual convergence
Move Enter Return
Red
√
Blue
√
Reset
BP68-00488A-00Eng 2005/02/18 09:46 AM Page 25