Filter
Top Products
English 29
|
04 Settings
9 . Select Network Test, and then press
E
.
When the test is completed, press RETURN
(
'
) button to exit to the previous screen.
10 . Select Network Status, and then press
E
.
11 . The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it is
done, highlight OK, and then press
E
.
|
NOTE
|
\
You can get the Network values from your Internet
provider. You can also view these values on most Windows
computers. For instructions, see "Getting the Network
Setting Values" on this page.
< Getting the Network Settings Values >
You can view your Network Settings values on
most Windows computers. To view the Network
Settings values, follow these steps:
• Windows XP
1 · Right click the Network icon on the bottom
right of the Windows desktop.
2 · In the pop-up menu, click Status.
3 · On the dialog that appears, click the Support
tab.
4 · On the Support tab, click the Details button.
The Network settings are displayed.
• Windows 7
1 · Click the Network icon on the bottom right of
the Windows desktop.
2 · In the pop-up menu, click Network and
Sharing Centre.
3 · On the dialog that appears, click the Local
Area Connection.
4 · On the Support tab, click the Details button.
The Network settings are displayed.
|
NOTE
|
\
Depending on your Windows version, the information may
differ.
Upgrading Software
The Software Upgrade menu allows you to
upgrade the product’s software for performance
improvements or additional services.
• Never turn the product off or back on manually during
the update process.
1 · In the Home menu, select Settings, and then
press the
E
button.
2 · Select Support, and then press the
E
button.
3 · Select Software Upgrade, and then press
the
E
button.
4 · Select one of the following methods:
• By Online
• By USB
• Auto Upgrade Notification
5 · Press the
E
button.
Directions for each method begin below.
|
NOTE
|
\
The update is complete when the product turns off
after restarting. Press the POWER button to turn on the
updated product for your use. Never turn the product on
or off manually during the update process.
\
Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a software upgrade.
\
If you want to cancel the upgrade while the upgrade
software is downloading, press the
E
button.
By Online
Your product must be connected to the Internet
to use the By Online function. Remove all discs
before you begin.
1 · Select By Online, and then press the
E
button. The Connecting to Server message
appears.
2 · If an update is available, a popup message
appears asking if you want to upgrade.
If you select Yes, the product turns off
automatically, turns on, and then begins the
upgrade.