Filter
Top Products
English-25
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1 Press the
MENU
button.
Result
: The main menu is displayed.
2 Press the or button to select
Picture
.
Result
: The options available in the
Picture
group are
displayed.
3 Press the
ENTER
button.
4 Press the
ENTER
button again.
Result
: The options available in the
Mode
group are displayed.
5 Select the option (
Contrast, Brightness, Sharpness, Colour,
Tint
) to be adjusted by pressing the or button.
Press the
ENTER
button.
Result
: The horizontal bar is displayed.
6 Press the or button to reach the required setting.
7 When you are satisfied with the setting, press the
MENU
button
to return to the previous menu or press the
EXIT
button to return to
normal viewing.
Each adjusted setting will be stored separately according to its
input mode.
The Tint is "inactivated" as following cases.
• Analog mode (RF, Scart, Video, S-Video)
In case of an input signal setting to PAL-50, PAL-CN,
and SECAM.
• Componen, DVI, and HDMI mode
In case of a input signal setting to 60Hz; 480i, 480p,
720p @60Hz, 1080i @60Hz.
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 25