Filter
Top Products
English-69
To keep your product up-to-date with new Digital Television
features then software upgrades are periodically broadcast as part
of the normal Television signal. It will automatically detect these
signals and display the software upgrade banner. You are given the
option to install the upgrade.
Upgrade Now
If you select Upgrade Now, the iDTV immediately installs
the new upgrade and then restarts.
Upgrade Later
If you select Upgrade Later, the upgrade is postponed until the next
restart or channel change some 90 minutes later, when the upgrade
dialog appears again.
Don’t Upgrade
If you select Don’t Upgrade, the iDTV does not perform the upgrade
and the software upgrade banner is not displayed again.
The upgrade is still stored internally, to subsequently upgrade to the
new version then the following sequence of steps are performed.
1 Press the D.MENU button.
Result
: The DTV menu is displayed.
2 Press the or button to select System.
Result
: The options available in the System group are displayed.
3 Press the ENTER button.
4 Press the or button to select Software Upgrade, and press the
ENTER button.
Result
: The software upgrade information is displayed.
5 To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
6 Press the D.MENU button to return to the previous menu or press
the EXIT button to return to normal viewing.
Upgrading the Software (Option)
02 BN68-00905A-X0Eng.qxd 4/6/05 3:15 PM Page 69