Filter
Top Products
English-15
"
p
s
u
v
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is fully compatible with all multichannel
formats.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the
ENTER/OK
button.
2. Press the or button to select “SRS TSXT”,
then press the
ENTER/OK
button.
3.
Press the or button to select “On” or “Off”. Press the ENTER/OK
button.
4. Press the EXIT button to exit.
Setting the TruSurround XT (SRS TSXT)
Listening to the Sound of the Sub Picture
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
Selecting the Internal Mute
Adjusting the Volume Automatically
During the PIP features activation, you can listen to the sound of the sub picture.
1. Press the MENU button to display the menu.
Press the or button to select "Sound", then press the ENTER/OK button.
2.
Press the or button to select "Sound Select", then press the ENTER/OK button.
3. Press the or button to select "Sub". Press the ENTER/OK button.
4. Press the EXIT button to exit.
You can select this option when the "PIP" is set to "On". (refer to page 13)
If you want to hear the sound through separate speakers, cancel the internal amplifier.
1. Press the MENU button to display the menu.
Press the or button to select "Sound", then press the ENTER/OK button.
2.
Press the or button to select "Internal Mute", then press the ENTER/OK button.
3. Press the or button to select "On" or "Off". Press the ENTER/OK
button.
4. Press the EXIT button to exit.
When "Internal Mute" is set to "On’, the Sound menus except for "Sound Select"
(in PIP mode) cannot be adjusted.
Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust
the volume every time the channel is changed. This feature allows you to automatically adjust
the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the sound output when the modulation
signal is low.
1. Press the MENU button to display the menu.
Press the or button to select "Sound", then press the ENTER/OK button.
2. Press the or button to select "Auto Volume", then press the ENTER/OK button.
3. Press the or button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT button to exit.
TruSurround XT, SRS and
symbol are trademarks of
SRS Labs, Inc. TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
BN68-01007R-00Eng.indd 15BN68-01007R-00Eng.indd 15 2006-08-08 9:24:072006-08-08 9:24:07