Filter
Top Products
31
ENG
Using the Fine Tune
If reception is weak, you can fine tune a channel manually.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the † or … button to select Channel.
Result
:
The options available in the
Channel
group are
displayed.
3 Press the ENTER () button.
4 Press the † or … button to select Fine Tune. Press the ENTER
() button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button
to reach the required setting.
5 Press the œ or √ button until the picture and sound are both clear
and sharp. Press the ENTER () button.
6 To reset the fine tuning to 0, select Reset by pressing the † or …
button then press the ENTER () button.
➢
If you are unable to fine tune a channel, check that the
Colour System
and
Sound System
settings are correct.
➢
Fine tune Store will change the colour of the Channel
OSD(On Screen Display) from White to Red.
P 1
0
Fine Tune
Reset
Return
Move
œœ √√
Adjust Store
Country : Austria
√√
Auto Store
√√
Manual Store
√√
Edit
√√
Fine Tune
√√
Ch. Scan
√√
Channel
TV
P 1
3
Fine Tune
Reset
Return
Move
œœ √√
Adjust Store
Fine Tune
P 1 is fine tuned
3
Reset
Return
Move
œœ √√
Adjust Store
P1 C11
Move Enter Return
BN68-00679A-00 ENG 4/19/04 2:57 PM Page 31