Filter
Top Products
60
How to Install Speakers
ENG
Parts
The actual product may differ
slightly from the illustration.
Speakers
2 EA
How to Assemble the Speakers(Standing)
①
Remove the screws indicated on the rear of the PDP
(6 screws on the left and right sides).
③
Secure the Speaker Dust Cover by setting it into the
grooves located on the front side of the speakers.
④
Connect the speakers to the PDP using the speaker cable.
The connection terminals are on the rear side of both the
PDP and the speakers.
(Match the color coded terminals and cables.)
②
Set the Speaker Guide Bracket into the square grooves
located on either side of the PDP’s bottom rear then push
the Speaker Guide Bracket towards the center (as the arrow
illustrates). Secure the Speaker Guide Bracket with provided
screws @. (Always use the proper screws, as indicated.)
Middle Cabinet
(Wall Mount Only)
1 EA
Speaker Dust Cover
1 EA
Speaker Cable
Screws
Screw①
: 2EA
Screw➁
: 6EA
➢
This speaker installation guide is for the 5040 Model.
WW
WW
AA
AA
RR
RR
NN
NN
II
II
NN
NN
GG
GG
1. When moving the PDP with the speakers attached, be sure to hold on to the PDP to prevent damage.
(Damage may occur to the speaker connecting brackets or the speakers.)
2. Speakers of 8Ω Impedance, 15W Nom. Power, 30W Max. Power is recommended.
screw@
BLACK
BLACK
RED
RED
BN68-00679A-00 ENG 4/19/04 2:58 PM Page 60