Filter
Top Products
ENG-61
Changing
Setup Menu
ENG-60
CHANGING
SETUP MENU
Setting Up the Audio Options
Audio Options allows you to setup the audio device and sound status settings
depending on the audio system in use.
3
Press the
/❷
buttons to
select Audio Setup, then
press the
❿
or ENTER
button.
4
Press the
/❷
buttons to
select the desired item,
then press the
❿
or
ENTER button.
1
With the unit in Stop
mode, press the MENU
button.
2
Press the
/❷
buttons to
select Setup, then press
the
❿
or ENTER button.
▼
To exit the setup menu, press the MENU
button.
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
EZ Setup
❿
Setup
Language Setup
❿
Audio Setup
❿
Display Setup
❿
Parental Setup :
❿
EZ Setup
❿
Dolby/DTS Digital Out : PCM
Dynamic Compression : On
PCM Down Sampling : On
Speaker Setup
❿
AUDIO SETUP
CHANGING
SETUP MENU
Note
• To exit the setup menu, press the MENU button.
• DVD-AUDIO
- Outputs 2 channel digital audio only.
- Some DVD-AUDIO discs do not downmix, so they will not output 2 channel digital audio.
- MULTI channel DVD-AUDIO discs play back through the analog outputs.
• Super Audio CD
- Outputs analog signals only.
- Super Audio CD audio is only available through the analog outputs.
It is not possible to output Super Audio CD audio via the HDMI output or Digital Audio Output.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS),
you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down sampling to On.
- SACD audio is only available through the analog outputs. It is not possible to output
SACD audio via the HDMI output or Digital Audio Output.
❶ Dolby/DTS Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.
❷.Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
❸ PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
❹ Speaker Setup (See pages 62~63)
00627F-HD950-XAC-Eng2 5/5/05 4:10 PM Page 60