Filter
Top Products
ENG-19
Connections
ENG-18
CONNECTIONS
• HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.
Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
• HDMI connection description
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
- The player outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the
screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a
TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and
signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal
from the player to your TV.
• What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD, etc.) and a
display device (TV, Projector, etc.). Content is encrypted at the source device to prevent unauthorized
copies from being made.
CONNECTIONS
1
Using an Anynet cable, connect the Anynet Input (Green)
terminal on the rear side of the DVD player to Anynet Output
(Black) terminal of the TV.
2
Using an Anynet cable, connect the Anynet Output (Black)
terminal to Anynet Input (Green) terminal of other AV device.
3
Set up the Anynet function on the Samsung TV.
GREEN
BLACK
BLACK
GREEN
DVD Receiver
AV Receiver
Set-Top Box
Recorder
GREEN
GREEN
GREEN
Connection to a TV with Anynet Jack
What is Anynet?
- Anynet enables you to control Samsung AV devices through the menu display on the TV screen,
using just the Samsung TV's remote control.
- This function works only with Samsung Anynet supported models.
- Using Anynet, you can easily control this DVD Player with your Samsung TV.
- For detailed operation steps and connections, refer to the Samsung TV Anynet user’s manual
- Please note that you need to set the Anynet on your Samsung TV to use the Anynet function.
Note
- Anynet operation is only available with Samsung TV sets that support Anynet.
- If Component (Progressive) or S-Video connection is used, some Anynet features will not be available. Use
Video/Audio cable for the connection.
- Anynet function will not operate when Input and Output terminals are connected improperly, because the TV
cannot communicate with external devices.
- Anynet terminals consist of Input (Green) and Output (Black) terminals.
- Match the color-coded cables to terminals when you connect the Anynet cable.
00627F-HD950-XAC-Eng1 5/5/05 4:07 PM Page 18