Samsung HL-R5067W Projection Television User Manual


 
Operating Tips
1) When the screen is switched to the TV program.
- When you select the first button, the TV button, in the Device List, it switches to the TV program.
- Although you have selected another device from the Device List, if detecting a video signal from
the device fails, the “Connection failed” message appears and the screen automatically switches
to the TV program.
- When the 1394 connection to the selected device is disconnected, the screen automatically
switches to the TV program.
2) AVHDD, DVHS and camcorders automatically stop when you select another device while watching
one of the devices.
3) Although some devices are displayed in the Device List, ‘UNCONTROLLABLE’ may be displayed
for some devices. This may happen when reading the device information has failed or the device
does not contain the device information.
4) Some devices may not be recognized and may be disconnected from the 1394 connection when
they are turned off.
5) When connecting another TV, the TV may transmit Digital TS which appears in the TV or another
picture (e.g. Only RF may be transmitted, although DVHS is being displayed on the screen)
depending on the TV specifications. (e.g. A Hurricane TV only transmits RF).
6) When connected to another STB, some STB’s may not be displayed in the Device List due to device
specifications or defects when multiple devices are connected.
Even if the device is displayed in the Device List, the connection to the device may fail. In this
case, you have to discover which device is defective by removing the devices one by one.
7) When connected to the AVHDD
- To rotate the AVHDD disc, there may a time delay.
- Some AVHDD’s may provide two playbacks or two recordings simultaneously. In this case, there
may be two Play icons in the Program List and 2 AVHDD buttons in the Target List.
- If you copy a program from the Program List, the selected AVHDD program is played on the TV
screen and recorded using the device selected from the Target List.
Even if the program reaches its end, the recording device does not stop automatically.
- Some AVHDD’s may display the wrong program information after recording, depending on the
situation.
- If AVHDD is recording, the program is automatically played which is currently being recorded,
when it is selected from the Device List. (PVR function)
8) When connected to DVHS
- Some devices support an automatic connect function (I-mode). These devices may cause a
malfunction when multiple devices are connected.
9) When connected to a camcorder
- Depending on the camcorder mode of either Tape Mode or Camera Mode, the control panel
changes. If the camcorder turns off the power (power saving mode), the camcorder may
disappear from the Device List.
10) When multiple devices are connected, some devices may appear and then disappear periodically
in the Device List. This is because some devices malfunction when multiple devices are connected.
In this case, you have to discover and remove the defective device from the connection by
removing the devices one by one.
Using the D-Net
English - 114
BP68-00469A-02(104~117) 9/2/05 10:41 AM Page 114