Filter
Top Products
Connecting a VCR and DTV Set-Top Box
1
Connect the Video/Audio
cables between the VIDEO
or S-VIDEO/AUDIO input
jacks on the TV and VIDEO
or S-VIDEO/AUDIO output
jacks on the VCR.
2
Connect the Video/Audio
cables between the VIDEO
or S-VIDEO/AUDIO input
jacks on the TV and VIDEO
or S-VIDEO/AUDIO output
jacks on the Set-Top Box.
3
Use the coaxial cable to
connect between the splitter
and the ANT 1 IN (CABLE)
on the TV and between the
splitter and the ANT IN on
the Set-Top Box.
4
Connect a coaxial cable
between the Antenna in
terminal on the VCR and the
Antenna out terminal on the
Set-Top Box.
Connecting to HDMI (High Definition Multimedia Interface)
1
Connect an HDMI cable
between the HDMI/DVI IN
jack on the TV and the HDMI
OUT jack on the Set-Top Box.
2
Connect the Video/Audio
cables between the VIDEO or
S-VIDEO/AUDIO input jacks
on the TV and VIDEO or
S-VIDEO/AUDIO output jacks
on the Set-Top Box.
3
Connect a coaxial cable
between the Antenna out
terminal (i.e., “ANT.OUT”)
on the Set-Top Box and the
ANT 1 IN (CABLE) on the TV.
NOTES
•Make sure the HDMI/DVI source’s
power is on, or you will be unable
to select it in the TV menu’s source list.
• For an explanation of Component video,
see your Set-Top Box owner’s manual.
•To use the TV Guide On Screen
TM
, you have
to connect both the Video/Audio cable and
the G-LINK
TM
cable.
Connections
English - 26
TV Rear Panel
DTV Set-Top Box Stereo VCR
Incoming Cable
or Antenna
1
4
3
2
TV Rear Panel
DTV Set-Top Box
Incoming
Cable or
Antenna
3
2
1
BP68-00469A-02(018~029) 9/2/05 10:34 AM Page 26