Samsung HL-R5067W Projection Television User Manual


 
English - 133
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
1
Unplug TV, then use a
screwdriver to remove the
screws.
2
Remove the Lamp cover.
3
Remove the screw securing
the Lamp by using a
screwdriver.
4
Separate the Lamp from the
engine by holding the handle
and pulling it out.
5
To reinstall the Lamp, follow
these steps in reverse order.
NOTES
Be sure the replacement Lamp is the same type.
After replacing the lamp, align the lamp cover with the groove and secure the screws.
The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
BP68-00469A-02(118~135) 9/2/05 10:42 AM Page 133